Petsafe PPA11-10711 Door User Manual


 
4 1-800-732-2677
Components
Interior Frame
with Flap
Located inside the battery
compartment is the SmartKey
, RFA-67
battery, mounting screws and key ring.
Exterior Frame
Cutting Template
Operating Guide
Mounting Screws
(4 pcs. small door)
(8 pcs. large door)
Key Ring
SmartKey
Battery
(PetSafe
®
RFA-67)
Tools Needed
• Jigsaw or Keyhole Saw
• Electric Drill
” (10 mm) Drill Bit
• Phillips Screwdriver
• 4 D-Cell (LR20)
Batteries (required)
• Level
• Tape
• Pencil
• String
____________________________________________________________________________________________________________________________________________
How the SmartDoor
Works
Using radio-frequency technology, the SmartDoor
reads a SmartKey
’s unique signal and triggers
a battery power-driven ap to unlock so your pets can come and go as they please. When the
SmartDoor
no longer senses your pets’ SmartKey
, the ap automatically locks back into place.
The SmartDoor
can detect up to ve programmed SmartKeys
and also operates in two other
modes: fully locked mode and unlocked mode.
Install the SmartDoor
Through a Wall with the
SmartDoor
Conversion Kit
SmartDoor
Conversion Kits are available for wall installation applications. The wall extension
conversion kit frames out exposed areas, giving your door installation a clean, smooth, nished
look. For brick, concrete or block wall construction an additional extension is available for the
large conversion kit. Note: The SmartDoor
Conversion Kit Small is designed to be recessed into
the brick and does not require additional tunnel extensions. You may purchase a SmartDoor
Conversion Kit or large extensions through selected online websites, www.petsafe.net or by calling
our Customer Care Center. See “Replacement Parts” on page 12.
Key De nitions
Radio-Frequency Technology – The use of a radio-frequency signal that can be transmitted
without wires.
SmartKey
– A SmartKey
is a battery-operated transmitter that sends a unique code to
the SmartDoor
.