Filter
Top Products
8 Customer Care Center 1-800-732-2677
How the System Works
A radio signal travels from the Fence Transmitter through a buried wire, marking the boundaries you
wish to set for your dog. Your dog wears a Receiver Collar that detects the signal at the boundary.
As your dog approaches the boundary, the receiver issues a warning tone. If he proceeds further, he
receives a safe but startling Static Correction. While harmless, the correction will persuade him to
stay in the containment area you’ve established. Boundary fl ags are a temporary visual aid for your
pet; remove them after training. This PetSafe
®
Deluxe Little Dog In-Ground Fence
™
has been proven
safe, comfortable, and effective for pets over 6 pounds, neck sizes 6 to 16 inches.
Key Definitions
Fence Transmitter: Transmits the radio signal through the Boundary Wire.
Pet Area: Area within the Warning Zone where your pet can roam freely.
Warning Zone: Outer edge of the Pet Area where your pet’s Receiver Collar begins to beep,
warning him not to go into the Static Correction Zone.
Static Correction Zone: Zone beyond the Warning Zone where your pet’s Receiver Collar will
emit a Static Correction, signaling him to return to the Pet Area.
Boundary Width: Combination of the Warning Zone and the Static Correction Zone.
Surge Protector: Installed with the Fence Transmitter to protect it from lightning strikes and
power surges. (USA and Canada only)
Receiver Collar: Receives the radio signal from the Boundary Wire.
Correction Level Button: Adjusts the level of Static Correction your pet receives in the Static
Correction Zone.
Receiver Indicator Light: Indicates the level of correction at which the Receiver Collar is set.
This light also serves as a low battery indicator.
Contact Points: Delivers the safe Static Correction when your pet moves into the Static
Correction Zone.
Power Jack: Where the Power Adapter plugs into the Fence Transmitter.
Boundary Control Switch: Switch located on the Fence Transmitter to adjust according to
the length of Boundary Wire used.
Boundary Wire Terminals: Where the Boundary Wires connect to the Fence Transmitter in
order to complete a continuous loop.
Loop Indicator Light: Indicates that the Boundary Wire makes a complete loop, enabling the
signal to be transmitted.
Boundary Width Control: Adjusts the width of the Warning and Static Correction Zones.
Note: Adjusting the knob does not change the level of Static Correction on the Receiver Collar.
Want professional installation help? Invisible Fence
®
Brand installers will come to your home
and install your new PetSafe
®
System for an additional cost. Contact your local dealer at
1-877-866-DOGS (3647) or visit our website at www.invisiblefence.com for more information.
Pet
Area
Static Correction
Zone
Static Correction
Zone
Surge
Protector
with Power
Adapter
Fence
Transmitter
Warning
Zone
Warning
Zone
Boundary
Width
Contact Points
Battery
Module
Correction
Level Button
Receiver
Indicator
Light
(Top)
(Bottom)
Receiver Collar Fence Transmitter
Boundary Control Switch
Boundary Wire
Terminals
Loop Indicator Light
Power Light
Power
Jack
Boundary Width
Control