Pella 80YW0102 Window User Manual


  Open as PDF
of 13
 
Part Number: 80YW0102
These instructions were tested and developed for replacing windows in wood-frame wall
construction systems designed to manage moisture. This method of installation involves removing
the sash, frame stops and frame hardware from the existing window. The original window frame
will remain in place. If existing window frame shows signs of water infiltration or is damaged
beyond repair, this method should not be followed and the entire existing window should
be removed. Installation recommendations for other types of wall construction, wall systems,
conditions, multiple windows or bow/bay windows, may be obtained from Pella Corporation or a
local Pella retailer. Building designs, construction methods, building materials, and site conditions
unique to your project may require an installation method different from these instructions and
additional care on your part. Determining the appropriate installation method is the responsibility
of you, your architect, or other construction professional.
Always read the Pella
®
Impervia
®
Limited Warranty before purchasing or
installing Pella Impervia products. By installing this product, you are acknowledging that this
Limited Warranty is part of the terms of the sale. Failure to comply with all Pella Impervia
installation and maintenance instructions may void your Pella Impervia product warranty. See
Limited Warranty for complete details at http://warranty.pellaimpervia.com.
REMEMBER TO USE APPROPRIATE
PERSONAL PROTECTIVE EQUIPMENT.
CAUTION: Many windows in older
homes are painted with lead-based
paint. Removal of old windows may
disturb this paint. Proper precautions
must be taken to minimize exposure
to dust and debris. Consult state or
local authorities for more information.
4JMM"EBQUFS 'MBTIJOH5BQF
&95&3*03
YOU WILL NEED TO SUPPLY:
Ř&HGDURU,PSHUYLRXVVKLPVVSDFHUVWR
Ř&ORVHGFHOOIRDPEDFNHUURGVHDODQWEDFNHU
WRIW
Ř3HOOD
®
SmartFlash
™
foil backed butyl window
and door flashing tape or equivalent
Ř3HOOD:LQGRZDQG'RRU,QVWDOODWLRQ6HDODQWRU
equivalent high quality, multi-purpose sealant
WXEHSHUZLQGRZ
Ř/RZH[SDQVLRQORZSUHVVXUHSRO\XUHWKDQH
insulating window and door foam sealant. DO
NOT use high pressure or latex foams
Ř[:RRGVFUHZVWRSHUZLQGRZ
Ř3HOODUHSODFHPHQWZLQGRZVLOODGDSWHU
TOOLS REQUIRED:
Ř7DSHPHDVXUH
Ř/HYHO
Ř6HDODQWJXQ
Ř3U\EDU
Ř8WLOLW\NQLIH
Ř3XWW\NQLIH
Ř+DPPHU
Ř6FUHZGULYHUV)ODW3KLOOLSV
Ř$GMXVWDEOHSOLHUV
Ř6LGHFXWWHUV
Ř5RWRWRROUHFLSURFDWLQJVDZ
Ř:RRGFKLVHO
ŘGULOOELW
Ř'ULOO
Installation will require two or more persons for safety reasons.
4&"-"/5
4&"-"/5
©2009 Pella Corporation
WINDOW REPLACEMENT INSTRUCTIONS FOR SINGLE-HUNG,
DOUBLE-HUNG, CASEMENT, AWNING
INTO EXISTING
DOUBLE-HUNG FRAME USING FRAME SCREWS FROM THE EXTERIOR
next