![](http://pdfasset.owneriq.net/d/a5/da53fc7e-e0de-4c43-92ed-5e1496a1ae6f/da53fc7e-e0de-4c43-92ed-5e1496a1ae6f-bg5.png)
Installation
PREPARE VIDEO AND ELECTRICAL CABLING
1. Temporarily remove the bottom end cap of the MR5000 Series mount if the end cap is
installed.
2. Feed the 42-inch video cable (provided) through the monitor feedthrough hole in the mount
arm and out the bottom end of the mount arm.
3. Pull power wires through the ICS-DO111ABK feedthrough hole located at the bottom of the
mount arm. Remove the 0.750-inch plug if it is installed.
C2495M-A (1/06) 5