Filter
Top Products
Pelco Manual C2436M-B (9/02) [ 5 ]
IMPORTANT SAFEGUARDS AND WARNINGS
DESCRIPTION
Designed specifically for the MR5000 Series Public View System, the ICS-DO101ABK Integrated Camera
System packages a camera and lens into a small, discreet, high-security dome.
Pelco’s MR5000 Public Viewing Station is specifically designed for retail applications to provide a clear,
visual warning to potential shoplifters that these premises are under surveillance. When properly installed
the station is an effective deterrent against shoplifting.
INSTALLATION
1. Installation and servicing should only be done by qualified service personnel and conform to all local
codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P enclosure, it is
designed for indoor use only and must not be installed where exposed to rain and moisture.
3. Use only installation methods and materials capable of supporting four times the maximum specified
load.
IMPORTANT
To maximize
tamper
resistance
when not
using the
side conduit
opening for wire
connections, verify that the
conduit plug and set screw are tight.
1
Attach Adapter Plate to Base of ICS-DO101ABK
1. Align the adapter plate to the base of the ICS-DO101ABK.
2. Using the two 10-32 x .375-inch pan head screws and internal lock washers, attach the base of
the ICS-DO101ABK to the adapter plate.