Filter
Top Products
C2491M-C (1/06) 11
ADJUST POSITION
1. Turn on power to the camera and monitor.
2.
Varifocal lens only:
Loosen the focal length and focus locking screws (refer to
Figure 9). Adjust according to scene detail. Retighten the screws.
Figure 9.
Varifocal Lens Adjustment
3. Adjust the position of the camera.
REPLACE COVER
Place the cover of the ICS210 onto the base of the unit. Using the screwdriver bit (provided), tighten
the three tamperproof screws.
NOTE:
Remove the foam from the inside of the cover before installing the cover.
WARNING:
Heater elements could be hot! When camera power is on, use caution when
adjusting the camera. This applies to all models.
LOCKING
SCREWS