Filter
Top Products
10 C494M-E (9/06)
Specifications
Mechanical
Camera Mounting Adjustable tilt table
Maximum Camera/Lens Size Accepts camera/lens combinations (including BNC connector) up to
3.0" H x 3.0" W x 6.0" L (7.62 x 7.62 x 15.24 cm)
Enclosure Mounting Four 0.390-inch (0.99 cm) diameter holes on protected rear surface
Security Tamper-resistant screw; N.O./N.C. switch contact on cover
Tamper Switch Plunger type door switch with “pull to cheat” feature. N.O./N.C. contacts clearly marked on body of
switch. DM electrical rating: 10 A, 125 VAC.
Electrical
Cable Entry Access through back and top
Tamper Switch 0.250-inch (0.63 cm) quick connect. N.O./N.C. clearly marked on switch body. 10 A maximum switching
current, 125 VAC maximum switching voltage
General
Window 0.250-inch (6.35 mm) thick impact and abrasion-resistant, clear Lexan polycarbonate resin thermoplastic
Construction Formed 14 gauge 0.074-inch (0.19 cm) steel
Finish Gray polyester powdercoat
Environment Indoor; 32° to 120°F (0° to 49°C)
Unit Weight 7.77 lb (3.52 kg)
(Design and product specifications are subject to change without notice.)
NOTE:
VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
10.25
(26.04)
4.50
(11.43)
8.00
(20.23)
5.00
(12.70)
10.13
(25.73)