Filter
Top Products
C2410M-J (2/08) 5
Description
The 150 Series Camclosure
®
integrated camera system is an in-ceiling dome incorporating a camera and
lens package into a small, discreet, high-security enclosure designed for areas subject to heavy vandalism.
The system is perfect for a variety of indoor and outdoor applications and its versatile design allows for
multiple mounting options.
The ICS150 Series Camclosure can be installed directly to a wall, ceiling, 4S electrical box (using the
optional ICS150 adapter plate), or a ceiling tile.
Installation
INSTALL BACK BOX
MOUNTING DIRECTLY TO A WALL OR CEILING
1. Cut a hole 3.5 inches (9 cm) in diameter in the
ceiling or wall using the adapter plate as a
template.
2. Connect the video cable.
3. Connect the power wires.
• For 12 VDC, connect the 24 VAC/12 VDC (red)
and GND (black) wires to input power. The
blue wire is not used.
• For 24 VAC, connect the 24 VAC/12 VDC (red) and 24 VAC (blue) wires to input power.
The black wire is not used.
4. Attach the back box to the wall or ceiling.
MOUNTING TO 4S DEEP ELECTRICAL BOX
1. Attach the adapter plate to the 4S box
with the two 8-32 x 0.750-inch screws.
(supplied)
2. Connect the video cable.
3. Connect the power wires.
• For 12 VDC, connect the 24 VAC/
12 VDC (red) and GND (black)
wires to input power. The blue
wire is not used.
• For 24 VAC, connect the 24 VAC/12 VDC (red) and 24 VAC (blue) wires to input power. The
black wire is not used.
4. Attach the back box to the adapter plate with the four 8-32 x 0.375-inch screws (supplied).
MOUNTING
HARDWARE
(NOT SUPPLIED)
BACK BOX
WALL OR
CEILING
MOUNTING DIRECTLY TO
WALL OR CEILING
8.32 X .750 SCREW
(SUPPLIED)
8.32 X .375 SCREW
(SUPPLIED)
WALL OR
CEILING
ADAPTER PLATE
BACK BOX
4S DEEP
ELECTRICAL
BOX
MOUNTING TO 4S DEEP ELECTRICAL BOX