Filter
Top Products
8 of 10
ISSUED: 10-01-10 SHEET #: 095-9354-3 12-13-10
Mounting Flat Panel Screen
• Tighten screws so screen brackets are fi rmly attached to screen. Do not tighten with excessive force. Overtightening
can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to
become detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
WARNING
Hook two 1/4-20 x 1/2" thread forming screws (L) onto top slots of front plate as shown in fi gure 6.1.
Fasten two 1/4-20 x 1/2" thread forming screws (L) into bottom mounting holes as shown in fi gure 6.2.
Tighten all screws.
6
fi g. 6.1
fi g. 6.2
FRONT PLATE
L