Filter
Top Products
FEATURE CHART
Power Headlight Cord Length Bare Floor
120V AC(60Hz) Yes 24 Ft Yes
Tableau des caractéristiques
Alimentation Dispositif Longueur du Position
d’éclairage cordon plancher
120 V c.a. (60 Hz) Oui 6 m (24 pi) Oui
DDiiaaggrraammaa ddee ccaarraacctteerrííssttiiccaass
VVoollttaajjee LLuuzz EExxtteennssiióónn UUssoo ssiinn
ddee ccoorrddóónn aallffoommbbrraa
120 V c.a. (60 Hz)
Si 6 m (24pi) Si
- 11 -
Air Turbine
Turbine à air
Turbina de aire
Motor Protector
Protecteur du moteur
Protector de motor
Adjustable Handle
Release Button
Bouton de dégagement
de la poignée ajustable
Mango ajustable,
botón de liberación
Short Hose
Tuyau court
Manguera corta
Extension Hose
Tuyau d’extension
Manguera expansible
Carrying Handle
Poignée de transport
Mango para transportar
Dusting Brush
Brosse àépousseter
Cepillo para sacudir
Crevice Tool
Suceur plat
Herramienta
para tapices
Body Release
Pedal
Pédale de réglage
de l’inclinaison du boîtier
Pedal de liberación
del mango
Dirt Sensor
Détecteur de
poussière
Indicador de polvo
Wand
Tube
Tubo
Power Cord
Cordon d'alimentation
Cordón electrico
- 54 -
Removing Clogs
Connector Pipe
Tube connecteur
Tubo conector
Short Hose
Tuyau court
Manguera corta
A
B
B
A
Suction Inlet
Entréed’aspiration
Entrada de aspiración
Hose Inlet
Entrée du tuyau
Entrada de
manguera
Secondary
Filter Screen
Tamis filtrant
Filtro secundario
Hose Coupling
Accouplement
de tuyau
Acoplamiento de
manguera
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢➢
Check the hose area.
➢➢
Remove extension hose by grasping
the hose collar, twisting, and pulling
straight off.
➢➢
Visually inspect the hose and the
base area into which the hose is
connected.
➢➢
Remove any visible clog.
➢➢
Re-connect the extension hose to the
connector pipe.
➢➢
Plug in the vacuum cleaner and turn it
on.
➢➢
Stretch the hose to maximum length
and then allow the hose to return to its
storage length.
➢➢
Turn off and unplug the vacuum
cleaner.
➢➢
Remove dust bin and check
secondary filter screen for clogs.
➢➢
If the dust bin, filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢➢
Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.