Filter
Top Products
- 34 -
FEATURES
Overload Protector
Belt Reset Button
Botón de
restauración
Bouton de remise
en circuit
➢ The overload protector stops the
Power Nozzle motor when the brush
jams and prevents belt breakage.
NOTE: Canister motor will continue to
run.
TO CORRECT PROBLEM:
➢ Turn off and unplug vacuum
cleaner.
➢ Check brush and brush support
areas for excessive lint build-up or
jamming.
➢ Clean jammed area.
TO RESET:
➢ Press the belt reset button on top of
the Power Nozzle. Plug in and turn
on vacuum cleaner.
Edge Cleaner
➢ Active brush edge cleaners are on
both sides of the Power Nozzle.
➢ Guide either side of the Power
Nozzle along base-boards or next
to furniture to help remove dirt
trapped at carpet edges.