Filter
Top Products
Replacing the dust bag
Replace the dust bag with the new one in
the following cases:
When the dust bag is full -
For more details on the dust indicator,
see page 3.
When suction power has dropped -
Open the dust cover, and then pull out
1
the dust bag.
Place a new dust bag, and then close 2
the dust cover.
If the dust bag is not properly installed,
the dust cover cannot be closed.
If suction power does not return, check
for blockages in hose, telescopic wand,
nozzles, and pre-motor filter.
Dust
cover
Dust bag
5
CG710_EN_UK.indd 7 2012/01/11 10:24:19