Filter
Top Products
Using the Appliance
Operating the appliance
Assemble the curved wand, telescopic 1
wand, and floor nozzle together.
MC-CG712 -
Connect the curved wand and the
floor nozzle to the telescopic wand by
aligning the tab with the hole.
MC-CG710 -
Connect the upper end of the telescopic
wand to the curved wand by aligning
the tab with the hole.
Connect the other end of the telescopic
wand to the floor nozzle by inserting
and twisting one another.
To disassemble them, press the release
button/pedal and pull them off from each
other.
Pull out the mains lead and insert the
2
plug into the socket outlet.
Press the OFF/ON
3
switch pedal to turn
on the appliance.
Press on the
mark
not the edge of the
OFF/ON switch pedal.
Adjust power by
4
sliding the variable
power control.
Parking and storing
Park position
Storage position
Perform the following before storing.
Turn off the appliance, and then
1
remove the plug from the socket
outlet.
Press the cord rewind pedal to rewind
2
the mains lead.
Hold the plug to ensure the mains lead
does not jump.
Press on the mark, not the edge of the
cord rewind pedal.
Store the supplied nozzles.
3
Cord rewind pedal
Telescopic
wand
Telescopic
wand
Curved
wand
Curved
wand
Floor
nozzle
Floor
nozzle
4
CG710_EN_UK.indd 6 2012/01/11 10:24:18