Filter
Top Products
OFF
LOW
COOL
LOW
FAN
HIGH
FAN
HIGH
COOL
THERMOSTAT
10
9
8
7
65
4
3
1
2
AIR SWING
ON
OFF
2
AIR CONDITIONER INSTALLATION
1 Air inlet louver 4 Air filter
2 Cabinet 5 Front intake grille
3 Power cord 6 Front grille
7 Vertical airflow direction vane
(Airflow direction adjustment up-down).
The vertical airflow direction vane is controlled by
rotating the horizontal vane forward or backward.
3
PART IDENTIFICATION
MAIN UNIT
8 Ventilation lever
The ventilation lever must be in the CLOSE position in order to maintain the best cooling
conditions. When fresh air is necessary in the room, set the ventilation lever to the OPEN
position. The damper is opened and room air is drawn out.
1
2
3
4
5
6
8
7
9
a
b
c
1 Remove the rubber plug and
slide the chassis out from the
cabinet.
Remove the
rubber plug
2 Install the optional drain pan (part no. CWH40175).
Screws
INTERNAL VIEW
Drain pan (optional)
Install the drain pan at the
right corner of the cabinet
using 2 screws (part no.
CWG86C733).
3 Connect a drain hose (optional).
Fit the drain hose to the drain pan.
EXTERNAL VIEW
Under-side view with drain
pan and hose in place.
Drain hose
(not included)
4 Slide the chassis back
into the cabinet.
Reinstall the cabinet to
chassis by using screws.
NOTE
The drain pan (part no.
CWH40175) can be
obtained from nearest
servicenter.
NOTE
Drain hose or tubing can be
purchased locally to satisfy
your particular needs.
THERMOSTAT
10
9
8
7
65
4
3
1
2
HIGH
COOL
OFF
LOW
COOL
LOW
FAN
HIGH
FAN
AIR SWING
ON
OFF
TH
A
IR
S
W
IN
G
O
N
O
F
F
O
F
F
LO
W
C
OO
L
LO
W
FAN
HIG
H
FAN
HIG
H
CO
O
L
TH
ER
M
O
STAT
10
9
8
7
6
5
4
3
1
2
AIR SWING
ON
OFF
9 Main control panel
a Air Swing Switch
OFF Stops the operation of Air Swing.
ON Air Swing is in operation.
(Only for LOW COOL, MED COOL, HIGH COOL and ECONOMY
operation.)
b Main Control Knob
Stops all operation
Low fan speed operation (without cooling)
High fan speed operation (without cooling)
Low fan speed with cooling operation
High fan speed with cooling operation
c Thermostat Control Knob
For decreased cooling
For increased cooling
HOW TO ATTACH THE DRAIN PAN (OPTIONAL)