Filter
Top Products
20
POWER
TIMER
AUTO COMFORT
NANOE-G
POWERFUL
QUIET
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see error code “H99”. Please
consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Human activity sensor
Do not hit or violently press or poke it with a sharp
object. This can lead to damage and malfunction.
Front panel
Wash gently and dry.
Remove the front panel
POWER
TIMER
AUTO COMFORT
NANOE-G
POWERFUL
QUIET
Raise
Pull out
1
2
Close it securely
POWER
TIMER
AUTO COMFORT
NANOE-G
POWERFUL
QUIET
Insert at
both sides
1
Press both ends of
the front panel
3
Close down
2
Press at center of the front panel.
4
nanoe-G Generator
Every 6 months
• Clean with dry cotton bud.
• Do not touch during operation.
Air fi lters
Every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter Attach air fi lter
Insert into the unit
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL
operation. After 15 minutes of operation, it
is normal to have the following temperature
difference between air inlet and air outlet
vents:
COOL: ≥ 8 °C
For extended non-use
• Activate nanoe-G operation for 2~3 hours as
an alternative to remove moisture left in the
internal parts thoroughly to prevent mould
growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Aluminium fi nFront panel
Air fi lters
Indoor unit
Human activity
sensor
nanoe-G
Generator
F568980_YA0113-1_EN.indd 20F568980_YA0113-1_EN.indd 20 1/17/2013 10:10:09 AM1/17/2013 10:10:09 AM