Filter
Top Products
18
To learn more...
Operation mode
AUTO: During operation mode selection the POWER indicator blinks.
• Unit selects operation mode during startup according to setting temperature and room temperature.
COOL: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode.
DRY : Unit operates at low fan speed to give a gentle cooling operation.
nanoe-G in-fi lter deactivation
Depending on the unit’s accumulated operation time, nanoe-G in-fi lter deactivation may activate only
once a day after the unit turned off.
To remove the moisture left in the internal parts, the fan will operate for 30 minutes with louver opened
slightly. This process only applicable when the unit is operated in COOL/DRY mode before turned off.
Then, nanoe-G deactivates viruses/bacteria on the fi lter for 2 hours with fan stopped and louver closed.
Do not turn off the power supply during this operation. After power failure, this operation will not resume.
ECONAVI and AUTO COMFORT
or
ECONAVI
AUTO
COMFORT
Note
AIR SWING
When manual AIR SWING is selected,
the ECONAVI and AUTO COMFORT
operations will be cancelled.
The unit will start to initialise
(for approximately 1 minute)
The human activity sensor
and the sunlight sensor will
start to detect.
Human activity sensor operation
Low activity Normal activity
Human
Mode
Set
temperature
High activity Absent
Low activity Normal activity
Human
Mode
Set
temperature
High activity Absent
Set
Fan Speed
COOL/DRY
COOL/DRY
+1 °C
+2 °C
-1 °C
Low activity
Human
Mode
Set
temperature
COOL/DRY
ECONAVI and AUTO COMFORT
+1 tap
≤Medium Fan**
+1 tap*
-2 °C
+2 °C
+1 °C
ECONAVI and AUTO COMFORT take advantage of
the human nature that human being takes time to feel
the temperature rise during low activity level; the unit
adjusts temperature to maximise energy saving
without sacrificing the comfort.
Precise control of temperature during low activity to maximise energy saving.
AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human
comfortable consistently.
ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.
* During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.
** During human absence, maximum fan speed for COOL/DRY mode is medium fan.
F568980_YA0113-1_EN.indd 18F568980_YA0113-1_EN.indd 18 1/17/2013 10:10:08 AM1/17/2013 10:10:08 AM