Filter
Top Products
5
1. Cooling capacities are based on indoor temperature of 27°C D.B. (80.6°F D.B.), 19.0°C W.B. (66.2°F W.B.) and outdoor air
temperature of 35°C D.B. (95°F D.B.), 24°C W.B. (75.2°F W.B.)
2. Heating capacities are based on indoor temperature of 20°C D.B. (68°F D.B.) and outdoor air temperature of 7°C D.B. (44.6°F
D.B.), 6°C W.B. (42.8°F W.B.)
Note
• Specifications are subject to change without notice for further improvement.
Fan
Type Cross-Flow Fan Propeller Fan
Material ASG20K1 PP
Motor Type Transistor (8-pole) Induction (6-pole)
Input Power W — 65
Output Power W 30 25
Fan Speed
Q-Lo (Cool/Heat) rpm 770 / 890 —
Lo (Cool/Heat) rpm 830 / 940 —
Me (Cool/Heat) rpm 1070 / 1170 —
Hi (Cool/Heat) rpm 1310 / 1420 770 / —
SHi (Cool/Heat) rpm 1350 / 1460 —
Heat Exchanger
Fin Material Aluminium (Pre Coat) Aluminium
Fin Type Slit Fin Corrugated Fin
Row x Stage x FPI 2 x 15 x 19 2 x 24 x 17
Size (W x H x L) mm 610 x 315 x 25.4
36.4 x 504 x 713
684
Air Filter
Material Polypropelene —
Type One-Touch —
Item Unit
Power Source (Phase, Voltage, Cycle)
ø Single
V 230
Hz 50
Input Power W
Cooling; 590 (175 ~ 750)
Heating; 835 (165 ~ 1340)
Starting Current A 3.9
Running Current A
Cooling; 2.8
Heating; 3.9
Power Factor %
Cooling; 92
Heating; 93
Power factor means total figure of compressor, indoor fan motor and outdoor fan motor.
*Maximum over current protection A 5.9
Power Cord
Number of core —
Length m —
Thermostat Electronic Control
Protection Device Electronic Control
ITEM UNIT INDOOR UNIT OUTDOOR UNIT