Filter
Top Products
12
other device. See the Frequently Asked Questions section for details.
1 From the Program Menu, press 4 to set the number of rings
2 You will hear the programmed number of rings
3 You will hear “Press one to change.”
4 Press 1 to make a change or 2 to return to the Program Menu
5 You will hear “Enter number then press pound”
6 Enter the number of rings, then press #
7 You will hear the number of rings you entered
8 You will be automatically returned to the Program Menu
Programming the "Full Access" PIN Number
The Four Zone Temperature Monitor and Alarm has a programmable "Full
Access" 4-digit PIN number (0000-9999) to allow users to access the Set
Limits option and Program sub-menu, and to confirm alarm conditions.
PIN number must be 4 digits and must not include a # sign.
1 From the Program Menu, press 5 to change the "Full Access" PIN
2 You will hear the programmed PIN number
3 You will hear “Press one to change.”
4 Press 1 to make a change or 2 to return to the Program Menu
5 You will hear “Enter number”
6 Enter a four digit number
7 You will hear the PIN number you just entered
8 You will be automatically returned to the Program Menu
Programming the "Acknowledge Only" PIN Number
The Four Zone Temperature Monitor has a programmable "Acknowledge
Only” 4-digit PIN number (0000-9999) to allow users to only to confirm alarm
conditions.
PIN number must be 4 digits and must not include a # sign.
1 From the Program Menu, press # to change the "Acknowledge Only” PIN
2 You will hear the programmed PIN number
3 You will hear “Press one to change.”
4 Press 1 to make a change or 2 to return to the Program Menu
5 You will hear “Enter number”
6 Enter a four digit number
7 You will hear the PIN number you just entered
You will be automatically returned to the Program Menu
Programming Reminder Calls
If a temperature is out of limits or a High Temperature door remains open af-
ter the alarm has been acknowledged, the Four Zone Temperature Monitor
can make “reminder calls”. This feature alerts personnel that a problem still
exists, and has not been fixed. The reminder call delay can be programmed
from 15 to 900 minutes.
1 From the Program Menu, press 6
2 You will hear "Off"
3 You will hear “Press one to change.”
13
4 Press 1 to change this setting, or 2 to return to the Program Menu.
5 You will hear "On"
6 You will hear “Callout time delay is XX minutes press 1 to change”
(Default value is 60 minutes)
7 Press 1 to make a change or press 2 to not make a change
8 You will hear “Enter number then press pound”
9 Enter the time delay in minutes (i.e. 120 for 2 hours)
10 You will hear the value you just entered
11 You will be automatically returned to the Program Menu
Programming Warning Message Repetitions
During callouts the Four Zone Temperature Monitor will repeat the local ID
message and warning conditions a programmable number of times (Default
1 repetition)
1 From the Program Menu, press 7
2 You will hear "Warning Reminder is 1"
3 You will hear “Press one to change.”
4 Press 1 to change this setting, or 2 to return to the Program Menu.
5 You will hear “Enter number then press pound”
6 Enter the number of times (0,1, or 2) that you would like the warning
message repeated.
7 You will hear the value you just entered
8 You will be automatically returned to the Program Menu
Set Temperature Readout Units (°C or °F)
The Four Zone Temperature Monitor and Alarm can display and report tem-
perature readings in degrees Celsius or Fahrenheit.
1 From the Program Menu, press 8
2 You will hear “Degrees is 32, press one to change”, indicating the tem-
perature reading at freezing in its current mode. (Default is Fahrenheit)
3 Press 1 to switch to Celsius Temperature Readout, or 2 to return to the
Program Menu.
4 You will hear “Degrees is 0”
5 You will be automatically returned to the Program Menu
Program Power Outage Delay Time
The Four Zone Temperature Monitor and Alarm can delay a programmable
amount of time before alarming due to a power outage. The default time is
5 minutes.
1 From the Program Menu, press 9
2 You will hear “Power callout time delay is 5 minutes press 1 to change“
3 Press 1 to change, or 2 to return to the Program Menu
4 You will hear “Enter number then press pound”
5 Enter the time delay in minutes (i.e. 15 for 15 minutes or 0 minutes for
an immediate callout)
► Acceptable range is 0 to 120 minutes
6 You will hear the value you just entered
7 You will be automatically returned to the Program Menu