Filter
Top Products
10-70
Page 46
2008-04-11
1. SPARE PARTS
A. Typically some spare parts are ordered with an AIRFOG system. These parts and kits
are to be retained in some safe location in a workshop for immediate access. It is
recommended that spare parts and repair kits be replaced as soon as they are
consumed.
B. Some NORTEC AIRFOG humidification system owners choose to not maintain in-house
spares or repair kits as there is sufficient redundancy built into the original design to
remain fully operational even if a few nozzles have to be shut down (disconnecting the
air pressure tube or removal and capping off the water and air delivery nozzle tubes).
The lead time to obtain replacement parts or repair kits is considered an acceptable risk.
Other owners decide that this risk is too high and choose to maintain spare parts and
repair kits in-house so that rapid repairs can be made.
Table 1. Rebuild Kits and General Parts
Part # Description
1603115 Repair kit for Watts pilot water regulator (1603114 / 1603004)
1603117 Repair kit for Watts pilot water regulator (1609412 & 1603112)
1603118 Repair kit for Norgren panel mounted air regulator (1603001)
1603119 Repair kit for Norgren brass water pressure regulator (1603002)
1603120 Repair kit for AFE Nozzles (1609209, MINI, Octo)
1603122 Diaphragm repair kit for vacuum valve (1609000)
1609503 Filter for Air Pressure Control Section (1609401)
1603116 Repair Kit for 1603104 Regulator