Filter
Top Products
I NTELLIP AD
®
Ci TOUCH
S CREEN K EYPAD
17
SYSTEM CONFIGURATIONS
Application Considerations
The Niles TS-1 Touch Screen Keypad is designed as an alternative to the IntelliPad
®
Ci Keypads
(i.e., Solo, Solo IR, Select, Select IR, Numeric, or Transport). Either or both can be used in a Niles
Multi-Zone System, such as the ZR-4630, ZR-8630AV, or A4.6Ci. Using standard CAT-5 cables,
interconnection is straightforward and will only require an optional TSP-1 Power Module when
more than three TS-1s are connected to a single multi-zone receiver or preamplifier (see Figure 10
on page 19). To help plan a system, we’ve included the following four applications for your review.
Connecting TS-1s in a Basic System
Figure 8
Three TS-1s are shown connected in a basic multi-zone system.
I NTELLIP AD
®
Ci TOUCH
S CREEN K EYPAD
16
DESCRIPTION/OPERATION OVERVIEW (continued)
Cleaning the TS-1
The TS-1 includes a Cleaning Mode program so you can temporarily turn off the Touch Screen to
clean dust and grime. For normal cleaning, use a dry, soft cloth to wipe off the dirt. To remove
excessive fingerprints or other contamination, first moisten the cloth with water or a window-
cleaning solution (e.g., Windex
®
), wring out the excessive liquid, and then wipe the TS-1.
NOTE: Do not use any other cleaning products. Do not spray any liquid directly onto the TS-1. Doing
so may damage the unit.
1. Press
OFF
to turn off the zone.
2. Press and hold
MUTE
until it starts to flash slowly. At this point, you have 15 seconds to clean
the TS-1.
3. When
MUTE
starts flashing rapidly, the program will automatically exit the Cleaning Mode in
5 seconds.
4. If you need more time, press
MUTE
once more while it’s flashing to reset the timer. Repeat
this step as needed until all your cleaning is done.