Filter
Top Products
I NTELLIP AD
®
Ci TOUCH
S CREEN K EYPAD
9
Touch Key Organization
The TS-1 Touch Screen is organized into three different groups of Touch Keys: Navigation Keys,
Master Keys, and Function Keys, as shown in Figure 3.
Figure 3
Organization of an example TS-1 Touch Screen.
NOTE: In any zone, the TS-1 will go into “Standby” after 30 seconds of inactivity and the Touch
Screen will become blank. To activate it, simply touch any part of the Touch Screen or a Hard Key.
continued on next page...
Navigation Keys
Function Keys
Master
Keys
I NTELLIP AD
®
Ci TOUCH
S CREEN K EYPAD
8
DESCRIPTION/OPERATION OVERVIEW (continued)
TS-1 Operation Overview
Hard Key Operation
Press
OFF
once to turn off the zone you are in. After 30 seconds, the
touch screen will go blank and the Hard Key backlights will turn off.
To turn off all zones, press and hold
OFF
for at least 3 seconds until
you see the Hard Keys flash three times.
After selecting a Master Key, press
DOWN
or
UP
to select a previous
or next function such as: preset station on a tuner, chapter on a DVD
or LD, track on a CD or media server, or channel on DSS. Also see the
TS-1 Programming Worksheets for exact programming details.
Press (
Zone On
) once to turn on the zone you are in and all Hard
Keys will backlight blue. Also, depending on programming, the Touch
Screen will highlight either a specified or last-selected Master Key and
show its first control screen.
Pressing and holding (
Zone On
) for more than 3 seconds will turn
on the zone you are in and turn on all other zones, as set by the ALL
ON/PAGE switch (see
the appropriate Niles Multi-Zone Control System
Installation and Operation Guide
). In newly-activated zones, the Touch
Screen will be blank and only (
Zone On
) will be backlit blue.
After selecting a Master Key, press
VOL
or
VOL
to set the audio
level. The
Zone Volume
indicator (see page 12) will show the current
volume setting (not available on the A4.6Ci
Multi-Zone Control System).
Press
MUTE
once to mute the audio in the zone you are in. The key will
backlight red and the (
Zone Volume
) indicator will change to
to indicate muting. To unmute audio, press
MUTE
once again. It will
again backlight blue and
Zone Volume
will display .
NOTE: The actual percentage displayed will be the current volume setting.