Filter
Top Products
W415-0616 / C / 06.04.08
15
STRAIGHT INSTALLATION
Through the Wall Installations Interior Vertical Vents
CORNER INSTALLATION
Through the Wall Vents Interior Vertical Vents
NOTE: If interior vertical pellet vent is used, the clearance to the back wall is determined by the upward-turning
elbow or "Tee". It will vary in depth depending on the brand of pellet vent used (it is approximately 5"). Before
placing the heater, connect the elbow or "Tee" and allow for the minimum 3" clearance to the combustible wall.
Figure 9
Figure 10
Figure 11
Figure 12
MINIMUM CLEARANCE TO COMBUSTIBLES
NPS40 INSTALLATION