Napco Security Technologies GEM-K1CA Home Security System User Manual


 
19
FUNCTION MENU
Activate Program?
Activates the Program Mode from Keypad No. 1.
Note:
This
feature is disabled while armed. (See PROGRAMMING USER CODES)
Activate Download?
For installer's use only. If accidentally enabled, press
C
to exit.
Note:
This feature is disabled while armed.
Relay Control?
(Relay Control programmed? YES NO).
Turns ON or OFF one or more programmed Relay Groups. Press
U
to turn the
displayed group on or off; press NEXT(
P) to proceed to the next group, or
PRIOR (
Q) to scroll back to the previous group. Press C when done.
(
Note:
This function available with GEM-P9600 and GEM-P3200 control panels only).
Relay Group 01: [ ____________________________________ ]
Relay Group 02: [ ____________________________________ ]
Relay Group 03: [ ____________________________________ ]
Relay Group 04: [ ____________________________________ ]
Relay Group 05: [ ____________________________________ ]
Relay Group 06: [ ____________________________________ ]
Relay Group 07: [ ____________________________________ ]
Relay Group 08: [ ____________________________________ ]
ACTIVATE
PROGRAM Y/N
ACTIVATE
DOWNLOAD Y/N
RELAY
CONTROL Y/N