Filter
Top Products
2
The GEM-DXRP3 is a “smart”, interactive,
menu-driven keypad designed for your
Napco control panel. A digital display is
provided to show the status of your system.
This booklet contains important information
about the operation of your system with this
GEM-DXRP3 Keypad. Read it carefully
and keep it handy for future reference.
Check the Glossary for an explanation of
terms that may be unfamiliar to you.
You'll probably find subjects mentioned in
this booklet that do not apply to your
system. Napco control panels have such a
wide variety of features that few security
systems, if any, will ever need them all.
Your alarm professional has chosen
appropriate features for your particular
needs.
Regardless of how your system has been
configured, rest assured that it has been
carefully designed and engineered to the
highest industry standards. To assure
optimum safety and security, familiarize
yourself with this equipment. Periodically
check its condition and state of readiness by
testing it at least once a week in both the ac/
battery and battery-only modes (ask your
alarm professional how to make these
tests).
INTRODUCTION
Test your sounding device and backup battery
1.While disarmed, press A.
2.Answer NO (press F) until “3” (Bell Test) appears in the
window.
3.Press YES (E) to execute the test. The alarm will sound
for about two seconds.
• If the alarm does not sound, call for service.
• If the battery is low, a system trouble E02 will appear in
the display. Allow 24 hours for the battery to recharge. If
the trouble continues, call for service.
Test your central station communicator
1. While disarmed, press A.
2. Answer NO (press F) until “15” (Telephone Test)
appears in the window.
3. Press YES (E) to send a test code to the central
station.
4. If the test is not successful, “E03” will display, indicating a
communication failure. Call for service.
IMPORTANT - TEST YOUR SYSTEM WEEKLY