Filter
Top Products
Abort Delay
Note which zones on your alarm
plan have abort delay. This is a
delay that enables you to reset the
system before a zone condition
report is sent to the central station.
Non-24 hour zone reports are
aborted by arming and then disarm-
ing. 24 hour zones, however, must
first be repaired.
Opening and
Closing
Reporting
An optional feature that permits
the central station to receive a
signal each time the system is
armed, disarmed or both (up to 4
individual users can be identified).
Central
Station
Rlngback
The central station will
acknowl-
edge the fact that you have armed
your system by “ringing back” with
a short beep
from
the Mini-Sounder.
(This is an optional feature that
re-
sponds to closing reports only.)
12