MTD 203b Vacuum Cleaner User Manual


 
5
WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who
read, understand and follow the warnings and instructions in this manual and on the machine.
Figure 2 Safety labels found on your unit
vac nozzle or optional Hose Kit
with engine running. Do not
operate unit unless nozzle or
optional Hose Kit is secured
in place.
• Do not fill gas tank while
engine is running.
Allow engine to cool at
least 2 minutes
before re-fueling.
and engine.
combustible debris off hot muffler
• Do not attempt to remove or attach
WARNING
TO AVOID SERIOUS INJURY
• Read Owner's Manual and all safety labels on machine before starting and using machine.
• Keep hands, feet, face, long hair and clothing out of chipper inlet, vac inlet, and discharge
area. There are ROTATING BLADES inside these openings.
• Wear approved safety glasses and gloves. Avoid loose fitting clothes.
• Keep the area of operation clear of all persons, particularly small children and pets.
• Keep all shields and guards (e.g. upper chipper chute extension, discharge chute, nozzle
• Check bag frequently for wear. Replace if worn or damaged.
• If unit becomes clogged or jammed, shut off engine right away. Do not attempt to clear
clog or jam with engine running. Refer to Maintenance Section of Owner's Manual for
unclogging instructions.
• Muffler and engine get hot and can cause burns. Do not touch. To avoid a fire hazard,
keep leaves, grass, and other
assembly) in place and securely attached.
CAUTION
DO NOT OPERATE THIS UNIT WITHOUT
ENTIRE BAG AND DISCHARGE CHUTE
IN PLACE. TURN THE ENGINE OFF AND
ALLOW THE IMPELLER TO COME TO A
COMPLETE STOP BEFORE REMOVING
THE BAG.
3046A
WARNING
ROTATING BLADES INSIDE. KEEP HANDS AWAY FROM ALL OPENINGS. DO NOT
REMOVE OR ATTACH NOZZLE OR OPTIONAL HOSE KIT WHEN ENGINE IS RUNNING!