Filter
Top Products
14 27D8520
LOG PLACEMENT
VWF24 MASSIVE OAK LOGS
1. Slide shield plate down back of burner pan. See
Figure 18.
2. Center rear log #1 on grate bars and flush with rear of the
grate. See Figure 19.
3. Place front left log #2 on the front of the grate and to the
left. See Figure 20.
4. Place front right log #3 on the front of the grate and to the
right. See Figure 21.
NOTE: Allow 2" between the back log and the
two front logs.
5. Install left side middle log #4 as shown. See Figure 22.
6. Install right side middle log #5 as shown. See Figure 23.
Burner
Pan
Shield
Plate
Rear Log (#1)
Front Left Log (#2)
Figure 20 - Placing Front Left Log (#2) on Grate
Figure 21 - Placing Front Right Log (#3) Figure 22 - Placing Left Middle Log (#4)
Front Right Log (#3)
Left Side Middle Log (#4)
Figure 18 - Sliding Shield Plate Down Back of
Burner Pan
Figure 19 - Centering Rear Log (#1) on Grate Bars
Continued