Filter
Top Products
73D0024
47
KHLDV Series Gas Fireplace
Burner Grate Assembly
LG593
KHLDV grate
LG593
Step 1
LG594
KHLDV rear log
LG594
1. Place the rear log over the grate toward the back by positioning the holes over the large pins located
at the right and left. When the log is in place, the back surface of the log will come in contact with
the light trapezoid deflector.
Step 2
LG595
KHLDV right front log
LG595
Step 3
LG596
KHLDV left front log
LG596
2. Place the log over the pilot by holding the log with the wide
end toward the back and the branch toward the front and
left. Set the log by having the protrusion on the bottom of
the log rest to the left side of the grate bar and behind the
pilot shield. Also set the notch located at the bottom of the
left branch over the second right tong on the grate. Make
sure that the log is positioned properly so it is not rocking.
3. Place the left front log in place by setting it over the left
side of the rear log (match protrusion to indentation), the
hearth brick and over the left tong on the grate. Match
the notch at the bottom of the branch with the tong on
the grate.