Monessen Hearth KHLDV500 Indoor Fireplace User Manual


 
28
73D0024
KHLDV Series Gas Fireplace
Continued on next page

You may check for gas leaks with the following methods
only:
Soap and water solution
An approved leak testing spray
Electronic sniffer
     
    



NOTE: Remove any excessive pipe
compound from the connections.
Excessive pipe compound can set off
electronic sniffers.







1. Depress and turn knob counterclockwise
to pilot position.
2. Depress fully and hold pilot gas knob. Depress
piezo igniter as many times as needed to ignite pilot.
Keep knob fully depressed for a few seconds.
Release and check that pilot continues to
burn.
If the pilot does not stay lit, repeat steps 1 and 2.

Figure 39 -
Pilot Position
Check for gas leaks in each of the following locations:
Pipe from the gas supply line connection to the gas valve
Burner connections Field made joints / gas shutoff valve
Pilot Factory made joints
Each joint or connection All joints on valve and control body




PILOT
O
F
F
P
I
L
O
T
O
N
FP1935
control knob pilot