Filter
Top Products
6
57D0016
IDV380/IDV490 Fireplace Insert
PILOT
O
F
F
P
I
L
O
T
O
N
Figure 36 -
Off Position
O
F
F
P
I
L
O
T
O
N
PILOT
FP1937
control knob on
PILOT
O
F
F
P
I
L
O
T
O
N
ON
OFF
FP1939
fan control knob
The “ON/OFF” switch for the main burner can be found on the right side of insert surround. This
switch allows you to turn on and to turn off the main burner without using the gas valve knob.
Make sure the button is in the “ON” position to light the main burner. Figure 33
Depress and turn the knob counterclockwise to the “ON” position. Figure 34. It will take less
than four (4) seconds for the burner to ignite.
Depress and turn knob to pilot position to keep burner off while maintaining the pilot light. Figure
35
Depress and turn knob clockwise to “OFF”
position. Figure 36
The internal blower helps transfer heat from heater into room.
It will not turn on until heater is up to temperature (approxi-
mately 10 minutes after starting).
To turn blower off, turn knob all the way counterclockwise
. One click clockwise turns blower to high speed.
Turning knob clockwise from high position decreases
speed of blower. Figure 37
Figure 37 -
Blower Knob
Figure 34 - On Position
Figure 35 - Pilot Position
Figure 33 -
On/Off Switch