Filter
Top Products
4. Deleting a unit from a group
(1) Using steps 1 and 2, call out the address No. of the unit to be deleted.
• When the FILTER switch is pressed twice in this state, the unit registered in the group
will be deleted.
5. Searching for registered units
The address numbers of all units registered in a group can be checked.
(1) Using step 1, select the group to be searched.
(2) The address numbers of the registered units will appear in order of smallest number each
time the MODE LOCK switch is pressed.
(3) If a single unit is not registered, "---" will display.
22
Press MODE LOCK
switch
once
For SC, if the system controller is also registered in another
group, that group operation status display will also flicker.
Press MODE LOCK
switch
once
Press MODE LOCK
switch
once
The attribute display will turn OFF and “- -” will
appear when normally completed.
Press FILTER
switch twice.