Mitsubishi SRK20ZMX-S Air Conditioner User Manual


 
–7–
Unit display section
Name of each part and its function
Buzzer sound for remote control
When preset temperature 24°C, automatic operation and automatic airflow are selected, the buzzer sound (PiPi) is produced.
When turning off the air conditioner by pressing ON/OFF button (except CLEAN mode), the buzzer sound (Pi) is produced.
This function is useful for operating the air conditioner in the darkness.
NOTE
Preset temperature
Air flow setting
Wireless remote control
Wireless remote
control holder
Allergen clear filter
(Light orange)
Photocatalytic washable
deodorizing filter (Orange)
Battery
(R03 (AAA, Micro) ×2)
Wood screw (Quantity:2)
(for remote control holder mounting)
Accessories
3D AUTO light (green)
Illuminates during 3D AUTO operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
Blinks during heating preparation.
TIMER light (yellow)
Illuminates during TIMER operation.
This button can be used for turning on/off the unit when re-
mote control is not available.
Page 8
Remote control signal receiver
Unit ON/OFF button
RUN (HOT KEEP) light (green/blue)
Illuminates during operation.
green: except ECONO operation
blue : ECONO operation
Blinks when airflow stops due to the ‘HOT
KEEP’
,
CLEAN operation
’and ‘
operation
mode invalid
’.
Page 24
ON
OFF
1.5 sec.
0.5 sec.
HOT KEEP
3 sec.
1 sec.
ON
OFF
CLEAN
operation
CAUTION
Do not touch the air inlet panel while it is operating.
The air inlet panel opens up while the system is operating.
Please do not install the unit in a fashion in which the air inlet
panel cannot open or place objects near the indoor unit.
Operation
mode
invalid
ON
OFF
Page 30
0.5 sec.
0.5 sec.
1.5 sec.
ON
OFF
0.5 sec.
RKY012A012B_EN_001-032 4/18/14, 16:487