Filter
Top Products
32
1
3
Weekly timer
MENU HOLD
ON
OFF
RETURN SELECT
Select: SELECT
Cursor
Weekly timer No / Yes
The screen to enable (Yes) and disable (No) the
weekly timer will appear.
To enable the setting, move the cursor to "Yes"
with the F3 or F4 button, and press the
SELECT button.
Controller operation-Function settings
Main
Main display: RETURN
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
MENU HOLD
ON
OFF
RETURN SELECT
Select "Weekly timer" from the Main menu (refer
to page 22), and press the SELECT button.
When the scheduled timer for the preset temperature
is executed during the Setback mode, the Setback
operation will be cancelled, and the unit will return
to the previous operation mode before the Setback
operation has started.
2
F
F
F
F
Weekly timer
MENU HOLD
ON
OFF
RETURN SELECT
Setting display: SELECT
day Page
Sun Mon Tue Wed Thu Fri Sat
No.
The current settings will appear.
Press the F1 or F2 button to see the settings
for each day of the week.
Press the F4 button to see patterns 5 through 8.
Press the SELECT button to go to the setting
screen.
Weekly timer
The Weekly timer will not work in the following cases:
when the On/Off timer is enabled, when the weekly timer
is disabled, during an error, during check (in the service
menu), during test run, during remote controller diagnosis,
when the clock is not set, during Function setting, when
the system is centrally controlled (On/Off operation or
temperature setting from local controller is prohibited),
when the Hold function is enabled.
Button operation