Filter
Top Products
8
Safety Instructions
• Read all safety instructions before using the Wi-Fi Adaptor.
• This installation manual contains important safety information. Be sure to
comply with the instructions.
• After installing the Wi-Fi Adaptor, provide this installation manual to the
user. Instruct users to store it with their heat pump instruction manual in
a safe location.
Warning
(Improper handling may have serious consequences, including serious injury or death.)
• Installation of the adaptor must be carried
out by an authorised installer only.
• Improper installation may result in fire,
electric shock, or damage/water leaks.
Consult the dealer from whom you
purchased the unit, or a professional
installer.
• The adaptor should be securely
installed in accordance with this
installation manual.
• The unit should be mounted in a location
that can support its weight.
• If the unit is installed in a location that
cannot support its weight, the Wi-Fi
Adaptor could fall and cause damage.
• Connect and fasten the electric wires
securely so external force on the wires will
not apply on the terminals.
• Improper connection and mounting may
result in breakdown, heat generation,
smoke generation, or fire.
• Mitsubishi Electric components or other
designated components must be used for
installation.
• Improper components may result in fire,
electric shock, or damage/water leaks.
• Electrical work must be performed
by a licensed professional using the
instructions detailed in the installation
manual.
• Inadequate circuit capacity or improper
installation may result in electric shock
or fire.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
• Children should be supervised to ensure
that they do not play with the appliances.
• This device complies with all Australia
and New Zealand requirements for EMC
and electrical safety.
• Do not connect the Wi-Fi Adaptor to earth
inside the heat pump.