Filter
Top Products
5
Run the cables down the back of
the unit with the other cables. Tuck
cabling away and secure.
Reassemble the indoor unit and
restore power to the system.
Check that the MAC-558IF-E
Adaptor is flashing. The install has
now been completed.
The adaptor is now able to be
connected to the user’s router. Steps for
this are shown on the following pages.
65
7 8
Remove the cover of the indoor
unit, the cable terminal, and the
cover to the control board.
Locate the CN105 port on the
main control board and connect
the MAC-558IF-E Adaptor.
3 4
Please note, the above illustrates high wall unit installation. Installation will vary
depending on indoor model type.