- 8 -
SPECIFICATIONS
ITEM
PR-5YC
PRH-5YA
PRH-5YA-L
PR-8YC
PRH-8YA
PRH-8YA-L
PR-10YC
PRH-10YA
PRH-10YA-L
PR-15YC
PRH-15YA
PRH-15YA-L
PR-20YC
PRH-20YA
PRH-20YA-L
16.3 23.8 29.7 46.3 60.8
TOTAL COOLING CAPACITY
BTU/h 55,600 81,300 101,200 157,900 207,500
(GROSS)
kcal/h 14,000 20,500 25,500 39,800 52,300
kW
kW
13 19.7 25.3 38.4 50.2
SENSIBLE COOLING CAPACITY
BTU/h 44,400 67,100 86,500 130,900 171,400
(GROSS)
kcal/h 11,200 16,900 21,800 33,000 43,200
kW 15.1 23 32 45.5 61.2
TOTAL HEATING CAPACITY
BTU/h 51,600 78,600 109,100 155,100 208,700
(GROSS)
(PRH-YA,PRH-YA-L ONLY)
kcal/h 13,000 19,800 27,500 39,100 52,600
CAPACITY STEPS % 0-100 0-50-100
REFRIGERANT R22 (FACTORY CHARGED)
REFRIGERANT CONTROL CAPILLARY TUBE
EXTERNAR FINISH ACRYLIC RESIN COATING
COLOR (MUNSELL NO.) MUNSELL 5Y8/1
HEIGHT mm 1,000 1,200
DIMENSION
WIDTH mm 1,000 1,300 1,990
DEPTH mm 1,600 1,840
NET WEIGHT kg 299 393 413 698 729
COMPRESSOR HERMETIC LINE START (RECIPROCATING)
MOTOR OUTPUT kW 3.73 5.6 7.5 2
XX
XX
XX
XX
XX
5.6 2 7.5
INDOOR COIL CROSS FIN COIL
FAN CENTRIFUGAL (GALVANIZED STEEL) - BELT DRIVE
FAN MOTOR THREE PHASE CAGE INDUCTION MOTOR
FAN MOTOR OUTPUT kW 0.75 1.1 1.5 2.2 3
CMM 54 84 100 168 190
NOMINAL AIR FLOW CFM 1,907 2,967 3,532 5,934 6,711
L/S 900 1,400 1,660 2,800 3,160
EXTERNAL STATIC mmAq 10 10 10 20 20
PRESSURE Pa 100 100 100 200 200
OUTDOOR COIL CROSS FIN COIL
FAN PROPELLER - DIRECT DRIVE
FAN MOTOR THREE PHASE CAGE INDUCTION MOTOR
FAN MOTOR OUTPUT kW 0.15 0.35 0.35 2 0.35 2 0.35
CMM 95 185 185 2 185 2 185
NOMINAL AIR FLOW
CFM 3,355 6,534 6,534 2 6,534 2 6,534
L/S 1,583 3,083 3,083 2 3,083 2 3,083
DRAIN CONNECTION mm 25.4
HIGH PRESSURE SWITCH,FUSE
PROTECTION DEVICES
OVER CURRENT RELAY (COMP. & INDOOR FAN,OUTDOOR FAN )
INTERNAL THERMOSTAT (COMP. & OUTDOOR FAN )
ANTI SHORT-CYCLE TIMER, FREEZE & FROST PROTECTOR
NOTE 1. NOMINAL COOLING & HEATING CAPACITIES ARE BASED FOLLOWING CONDITIONS.
COOLING : INDOOR:27˚CDB, 19˚C WB ; OUTDOOR:35˚CDB.
HEATING : INDOOR:21˚CDB ; OUTDOOR:7DB, 6˚C WB.
2. CAPACITIES ARE GROSS CAPACITIES WHICH DO NOT INCLUDE A DEDUCTION FOR EVAPORATOR
FAN MOTOR HEAT.