Filter
Top Products
9
PCH24GK PCH30GK PCH36GK PCH42GK
24,000 30,000 35,400 42,000
27,000 [34,000/35,500] 33,000 [40,500/42,500] 38,000 [45,500/47,500] 45,000 [52,500/54,500]
14,800 [21,800/23,300] 20,000 [27,500/29,500] 21,000 [28,500/30,500] 23,800 [31,300/33,200]
2.51 3.23 3.60 4.10
2.46 [4.49/4.94] 3.00 [5.25/5.76] 3.32 [5.57/6.08] 3.76 [6.03/6.52]
1.95 [3.98/4.43] 2.58 [4.83/5.34] 2.63 [4.88/5.39] 3.00 [5.25/5.76]
10.3 10.0 10.3 10.3
6.8 7.0 7.0 7.2
PCH24GK PCH30GK PCH36GK PCH42GK
Munsell 0.7Y 8.59 / 0.97
208 / 230, 1, 60
20 25
15 17
1.1 1.3
9.8/10.8 [2.0/2.5] 10.8/12.0 [2.2/2.8]
710-880 990-1,240
640-810 880-1,130
51-9/16 63-3/4
26-3/4
10-5/8
87 101 106
PUH24EK PUH30EK PUH36EK PUH42EK7
Munsell 5Y 7/1
208/230, 1, 60
20 30 40
16 20 22 28
0.65+0.65 0.75+0.75 0.8+0.8
NH33NBD NH41NAD NH47NAD ZR42K3-PFV
11.5 14.0 17.5 20.4
54 73 87 109
0.16/0.17 (33/39)
Capillary tube
Reverse cycle
34-1/4 38-3/16
11-5/8 13-9/16
49-9/16
202 245 246 246
With indoor unit
Indoor unit-remote controller DC12V, Indoor unit- outdoor unit DC12V
Cooling *1 BTU/h
Capacity Heating *1,*3 BTU/h
Heating *2,*3 BTU/h
Cooling *1 kW
Heating *1,*3 kW
Heating *2,*3 kW
SEER
HSPF
INDOOR UNIT MODELS
External finish
Power supply V, Phase, Hz
Max. fuse size (time delay) A
Min. ampacity A
Fan motor F. L. A.
Auxiliary heater A (kW)
Airflow Dry CFM
Lo-Hi Wet CFM
Win
Dimensions D in
Hin
Weight lbs
OUTDOOR UNIT MODELS
External finish
Power supply V, Phase, Hz
Max. fuse size (time delay) A
Min. ampacity A
Fan motor F. L. A.
Models
Compressor
R. L. A.
L. R. A.
Crankcase heater A (W)
Refrigerant control
Defrost method
Win
Dimensions D in
Hin
Weight lbs
REMOTE CONTROLLER
Control voltage
(by built-in transformer)
Item
Models
Power
consumption
NOTES: *1 Rating conditions (cooling) – indoor: 80°F DB. 67°F WB outdoor: 95°F DB. 75°F WB
(heating) – indoor: 70°F DB. 60°F WB outdoor: 47°F DB. 43°F WB
*2 Rating conditions (heating) – indoor: 70°F DB. 60°F WB outdoor: 17°F DB. 15°F WB
*3 Heating capacity and power consumption in [ ] include auxiliary electric heater operation at 208/230V.
Units should be installed by licensed electric contractor accordingly to local code requirement.
* Specifications subject to change without notice.
5. Specifications