Filter
Top Products
7
I) REPLACING THE DUST BAG
H) BAG CHANGE INDICATOR
CAUTION: DISCONNECT THE CLEANER FROM THE OUTLET BEFORE
PERFORMING THE OPERATIONS BELOW
The bag change indicator located on the
front of your cleaner normally indicates
when the dust bag should be changed. In
order to maintain the best efficiency, it
should be changed when the yellow mark
appears in the window.
NOTE: if the yellow mark appears after the
bag has been replaced, check to see if the
hose or suction tube is clogged (see
BLOCKAGES). Due to the smaller intake,
the yellow mark may also appear when
using the crevice tool.
1) Remove the dust
cover by pulling it
forwards.
2) Grip the handle of the
dust bag and pull the
bag out of the dust
compartment.
3) Close dust bag tab to
avoid dust leakage
and put it away.
4) Install the new dust
bag by placing the
hole over the exhaust
port and pressing it
into place as shown.
IMPORTANT: For
maximum vacuum
efficiency, dust bags
should be changed
regularly.
Yellow
mark
Bag change
indicator
We recommend the use of genuine Miele dust bags only
Part # 5294740 Type Z
NOTE: If the dust bag is installed incorrectly,
the dust cover will not close.