Filter
Top Products
A) HANDLE ASSEMBLY
4
C) ON / OFF SWITCH
To start or stop the vacuum cleaner,
push the switch to “I” to turn it ON, and
to “O” to turn it OFF.
B) POWER CORD STORAGE
NOTE: To reduce the risk of electric shock, this appliance
has a polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
To avoid any possible damage to the power cord, never run
over the cord or allow it to become caught in the rotary
brush.
HOW TO ASSEMBLE / OPERATE YOUR CLEANER
1) Insert the base of the handle into
the top of the body of the
machine as shown. Push down
the handle and tighten the screw.
2) Set the hose around the hose
clip.
3) Turn the upper cord hook to
the upright position and wind
the power cord around the
upper and lower cord hooks.
IMPORTANT: Do not over
tighten the screw.
1) Turn the upper hook to
release the power cord
for instant use.
2) Set the power cord into
the cord clip to help
secure it during use
Hose clip
Upper cord hook
Lower
cord hook/
Carrying
handle