Miele S176i Vacuum Cleaner User Manual


 
7
I) REPLACING THE DUST BAG
H) BAG CHANGE INDICATOR
CAUTION: DISCONNECT THE CLEANER FROM THE OUTLET BEFORE
PERFORMING THE OPERATIONS BELOW
The bag change indicator located on the
front of your cleaner normally indicates
when the dust bag should be changed. In
order to maintain the best efficiency, it
should be changed when the yellow mark
appears in the window.
NOTE: if the yellow mark appears after the
bag has been replaced, check to see if the
hose or suction tube is clogged (see
BLOCKAGES). Due to the smaller intake,
the yellow mark may also appear when
using the crevice tool.
1) Remove the dust cover
by pulling it forwards.
2) Grip the cardboard of
the dust bag and pull
the bag out of the dust
compartment.
3) Install the new dustbag
by placing the hole over
the exhaust port and
pressing it into place as
shown.
IMPORTANT: For
maximum vacuum
efficiency, dustbags
should be changed
regularly.
Yellow
mark
Bag change
indicator
We recommend the use of genuine Miele paper bags only
Part # 5294740 Type Z
NOTE: If the dust bag is installed incorrectly,
the dust cover will not close.