Filter
Top Products
6
F) BEATER BAR SELECTOR
When cleaning carpeted floor, slide the selector to the
“BEATER BAR” position. To stop the beater bar while
using accessories, slide the selector to the “STOP”
position.
NOTE: The vacuum cleaner should be running when
changing the position of the BEATER BAR
SELECTOR.
B E A T E R
B A R
S T O P
BEATER BAR ON OR OFF
G) HOW TO USE THE ACCESSORIES
1) To use the accessories keep the vacuum cleaner
upright and slide the BEATER BAR SELECTOR to
the “STOP” position.
2) Pull the hose out of the intake port a the lower left
of the vacuum, and release it from the hose clip.
Connect the desired accessory as illustrated
below.
3) When finished using the accessory, re-insert the
hose end into the intake port and place the hose
under the clip. The accessories can also be
returned to their storage locations.
Hose clip
CAUTION: While using the accessories, hold
the handle as shown above to avoid pulling
the cleaner over.