Filter
Top Products
6
|
ENGLISH
CONNECTING JET NOZZLE / WIDE NOZZLE
WARNING: DO NOT attempt to connect any accessories while unit is emitting steam.
Doing so could result in burns or other injury.
1. Insert cylinder on back of Jet Nozzle or Wide Nozzle (FIGURE 1-A) into opening of Steam
Aperture (FIGURE 1-B). Align it so that two tabs on sides of cylinder t into two guide grooves
on sides of opening, as indicated in FIGURE 1. Be sure to push accessory in as far as possible.
2. Rotate Jet Nozzle or Wide Nozzle in a clockwise direction as indicated (FIGURE 2-A). Twist
until you feel it “lock” into place and it will move no further. Note that single guide line above
Steam Aperture aligns between dual guide lines on Jet Nozzle / Wide Nozzle (FIGURE 2-B).
3. Note the color difference between the Jet Nozzle or Wide Nozzle (gray) and the Steam Aperture
(yellow). When removing the Jet Nozzle or Wide Nozzle, be sure you are only trying to rotate
and remove the gray accessory. The Steam Aperture will not rotate and cannot be removed.
Assembling Your
Handheld Steam Cleaner
FIGURE 1
FIGURE 2
TABS
1-A 1-B
GUIDE GROOVES
2-A 2-B