Filter
Top Products
12
LE30
LE30
30
30
˚ ELBOW SET
ELBOW SET
LCS
LCS
CHIMNEY SUPPORT
CHIMNEY SUPPORT
LCLF FLAT WASHER
LCLF FLAT WASHER
36" x 72" (13-1/2" DIA. HOLE)
36" x 72" (13-1/2" DIA. HOLE)
AK4 COMBUSTION
AK4 COMBUSTION
AIR ASSEMBLY
AIR ASSEMBLY
WSB54
WSB54
GLASS DOORS
GLASS DOORS
L48 L36 L18 L12
L48 L36 L18 L12
CHIMNEY SECTIONS
CHIMNEY SECTIONS
SB5400SS
SB5400SS
LCL TELESCOPING
LCL TELESCOPING
CHIMNEY CAP
CHIMNEY CAP
LC
LC
CHIMNEY CAP
CHIMNEY CAP
612-1212
612-1212
FLASHING
FLASHING
LF-FS-2
LF-FS-2
FIRESTOP SPACER
FIRESTOP SPACER
H2068
H2068
HEARTH EXTENSION
HEARTH EXTENSION
KIT
KIT
H2068
H2068
WSB54
WSB54
AK4
AK4
LCLF
LCLF
403
403
FP-4-U
FP-4-U
LF-FS-30
LF-FS-30
LF-FS-2
LF-FS-2
1212
1212
612
612
LCL
LCL
LC
LC
LCS
LCS
LE30
LE30
L12
L12
L18
L18
L36
L36
L48
L48
SB5400SS
SB5400SS
MODEL NUMBER
Hearth extension-protects floor against sparks and radiant heat (residential ins
Hearth extension-protects floor against sparks and radiant heat (residential ins
tallation) 20"x68".
tallation) 20"x68".
Optional polished brass glass door kit.
Optional polished brass glass door kit.
4-inch outside combustion air assembly.
4-inch outside combustion air assembly.
3'x7' Flat chase flashing. For use with LCL chimney cap.
3'x7' Flat chase flashing. For use with LCL chimney cap.
4-inch duct connector (for splicing FP-4 ducts). Includes two clamps.
4-inch duct connector (for splicing FP-4 ducts). Includes two clamps.
4-inch insulated combustion air duct-8-foot lengths.
4-inch insulated combustion air duct-8-foot lengths.
Firestop spacer--for 30 degree chimney incline through ceiling or floor.
Firestop spacer--for 30 degree chimney incline through ceiling or floor.
17-inch firestop spacer. One required at each ceiling or floor level.
17-inch firestop spacer. One required at each ceiling or floor level.
6/12-12/12 pitch flashing for contemporary installation.
6/12-12/12 pitch flashing for contemporary installation.
0-6/12 pitch flashing for contemporary installation.
0-6/12 pitch flashing for contemporary installation.
Round telescoping chimney cap. For use with flat chase top terminations.
Round telescoping chimney cap. For use with flat chase top terminations.
Round chimney cap for contemporary installation. Includes storm collar.
Round chimney cap for contemporary installation. Includes storm collar.
Chimney support (required when chimney height exceeds 30 feet)
Chimney support (required when chimney height exceeds 30 feet)
One pair of 30-degree elbows. Maximum-two pairs (4 elbows per chimney)
One pair of 30-degree elbows. Maximum-two pairs (4 elbows per chimney)
1-foot chimney section (11-inch diameter flue/13" dia. outer pipe)
1-foot chimney section (11-inch diameter flue/13" dia. outer pipe)
1 1/2- foot chimney section (11-inch diameter flue/13" dia. outer pipe)
1 1/2- foot chimney section (11-inch diameter flue/13" dia. outer pipe)
3-foot chimney section (11-inch diameter flue/13" dia. outer pipe)
3-foot chimney section (11-inch diameter flue/13" dia. outer pipe)
4-foot chimney section (11-inch diameter flue/13" dia. outer pipe)
4-foot chimney section (11-inch diameter flue/13" dia. outer pipe)
See installation instructions for details.
See installation instructions for details.
combustion air capability. When installed, outside combustion air can be connect
combustion air capability. When installed, outside combustion air can be connect
ed to left side.
ed to left side.
44 Inch front opening fireplace. Includes stainless wire firescreen, sealing flu
44 Inch front opening fireplace. Includes stainless wire firescreen, sealing flu
e damper and outside
e damper and outside
DESCRIPTION
FIREPLACE COMPONENTS
FIGURE 15
53D9028. Rev 1 03/03