Filter
Top Products
14 MARMITEK
ENGLISH
EX-228C DOME CAMERA PARTS INDICATION
1. Microphone
2. Connection wires
3. CCD camera
4. Microphone Sensitivity Adjustment
5. Mounting Screws
If the camera is mounted is a small enclosed area, adjust the microphone sensitivity to a lower
level.
EX-228C DOME CAMERA
INSTALLATION
EX-228C DOME CAMERA SYSTEM SETUP
The camera is connected by a 2 wire cable to the
Base Unit. Additional Dome Camera’s can be
connected to the terminals DR2/Cam1 or Cam2 or
Cam 3. There is no polarity.
• Press and hold the left button of the
Base Unit (7) for at least 2 seconds to
enter in the Setup mode. The Menu
appears on the screen.
• Step through the menu
by pressing the left (7)
or right (9) button of
the Base Unit. Select
the camera
corresponding with the
Terminal number where
the camera is connected to. Activate the camera by
pressing the middle button (8).
Pick up the Handset and replace it to end the Setup
mode.