Filter
Top Products
20
Installation Accessories
Description Cat./ Part No.
Outside Air Kit (Required - Included with Fireplace)
Outside Air Coupler to connect outside air UZI to
fireplace, UZIAD
UZIDF
Outside Air Ducting - Includes 4" insulated flex x 10 ft.
long, UZI
UZI
Fireplace Options
Trim Kit - Gold H3426
Trim Kit - Brushed Nickel H3395
Door Capping - Gold H3393
Door Capping - Brushed Nickel H3394
Blower UZY5
Blower Motor Speed Control VRUW
Fireplace Model ME43 - Approved Venting Components
8" Diameter Chimney - Model ASHT+, S-2100+, HT6000+, HT6103+ or AC
manufactured by Security Chimneys International only.
Notes:
1. (Projet NovaTemp™) HT6000+ is equivalent to S-2100+
2. (Projet NovaTemp™) HT6103+ is equivalent to ASHT+
3. This appliance is equipped with the ASHT Chimney Adaptor. When other chimney
is used, a chimney adaptor for the chimney will be required.
4. Chimney Adaptor (S-2100+ / HT6000+) for CANADA ONLY - If you want to install
a S2100+ / HT6000+ chimney, an adaptor is available (8UCA).
5. AC Chimney is Not recommended at elevations above 4000 feet or in cold
climates where temperatures are likely to fall below 32° F (0° C). When using
AC chimney, an AC8SB starter section must be used before installing an elbow.
When an offset is needed immediately off the top of the fireplace, a starter
section (AC8SB30) is available.
OPTIONAL INSTALLATION ACCESSORIES - ME43
Installation Accessories
Description Cat./ Part No.
Forced Air Heating Kit
Starter Kit: For wall or furnace installations. Includes
blower (BISZY), flex adaptor and two clamps (BISAF),
blower variable speed control (VRUW), thermo disc
(VTU), blower flex adaptor (BISAVF), and back draft
damper (BISBD)
BISFWK-1
Flex - Choose 15 feet or 25 feet depending on installation
Flex 5 inches ID x 15 feet Long 5FLEX15
Flex 5 inches ID x 25 feet Long 5FLEX25
Starter Kit Separate Components
Blower flex adaptor, includes damper (BISBD) BISAVF
Blower - 250 CFM BISZY
Flex adaptor and two clamps for fireplace connection BISAF
Blower motor speed control VRUW
Thermo disc - turns motor on when fireplace is hot and
off when cool
VTU
Back draft damper - prevents air blowing from furnace
into fireplace
BISBD
Options
Heating / Cooling Thermostat - 120 Volts HCTW