Lux Products P111 Thermostat User Manual


 
This thermostat is powered by two “AA” Alkaline batteries. The batteries should
be replaced AT LEAST once per year to ensure reliable operation (or sooner if the
battery icon or “LO BATT” appears in the display screen). The batteries are
located on the back of the thermostat’s circuit board. The front portion of the
thermostat can be removed from the back half by using the housing release tabs
on the bottom edge of the thermostat housing.
When installing new batteries, we recommend using only brand new Energizer
®
or DURACELL
®
, “AA” size alkaline batteries. Please observe the polarity
markings shown in the battery compartment to ensure proper installation. When
finished, line up the front of the thermostat to the base, and firmly press together
to securely latch the front and back halves together properly.
If you have any problems installing or using this thermostat, please carefully and
thoroughly review the instruction manual. If you require assistance, please
contact our Technical Assistance department at 856-234-8803 during regular
business hours between 8:00AM and 4:30PM Eastern Standard Time, Monday
through Friday. You can also receive technical assistance online anytime day or
night at www.luxproproducts.com. Our website offers you troubleshooting guides,
answers to the most common technical questions, and also permits you to email
your questions to our technical support staff at your convenience.
22
BATTERY REPLACEMENT:
TECHNICAL ASSISTANCE: