KEYPAD LOCKOUT: You can lock the front panel buttons to prevent unauthorized
tampering of your thermostat settings.
TO LOCK THE KEYPAD: Start with the thermostat at rest, and the display backlight
NOT illuminated. Press the SET button one time to illuminate the display screen,
then press and hold the SET button for at least five seconds until a padlock icon
appears in the display screen.
TO UNLOCK THE KEYPAD: Start with the thermostat at rest, and the display
backlight NOT illuminated. Press the SET button one time to illuminate the
display screen, then press and hold the SET button for at least five seconds until
the padlock icon disappears from the display screen.
SOFTWARE RESET: A Software Reset is used to erase ALL heating and cooling
temperature programs, and to return all user-adjustable software settings back
to their original factory default values. To perform a Software Reset, first ensure
that the thermostat’s Keypad Lockout is not enabled and then move the System
Mode switch to the OFF position. Start with the thermostat at rest, and the
display backlight NOT illuminated. Press the SET button one time to illuminate
the display screen, then press and hold the SET button for at least five seconds
until the backlight goes out and the display screen becomes fully populated with
all segments visible.
COMPRESSOR PROTECTION BYPASS: This optional feature permits the installer
or service technician to temporarily disable the built in compressor protection
delays. This is most useful for diagnosing and testing the heating and cooling
systems after installation is complete, and should not be used during normal
operation. To activate this feature, first ensure that the thermostat’s Keypad
Lockout is not enabled and then move the System Mode switch to the OFF
position. Start with the thermostat at rest, and the display backlight NOT
illuminated. Press any button one time to illuminate the display screen, then
press and hold both the UP and DOWN buttons together at the same time for at
least five seconds. NOTE: there will no visual confirmation on the display screen
when this feature becomes activated, however you should be able to turn the
cooling system on and off without any protection delays being imposed. All
compressor protection delays (in all modes of operation) will be disabled for 5
minutes. After the 5-minute duration has expired, the thermostat will return to
normal operation automatically.
21
ADVANCED FEATURES: