Filter
Top Products
DIGITAL VIDEO RECORDER
31
2-2. Camera Setup
▶ Camera select: Select a camera to setup.
▶ For each camera
▪ Camera location: Describe the location where the selected camera is installed. This name will be displayed on
screen when viewing this camera.
▪ PTZ Camera: If using a camera, select the type of PTZ camera connected to this channel. Click the scroll button to
bring up a list of PTZ cameras that are currently available.
▪ PTZ Camera ID: Enter the switching ID of the PTZ camera connected to this channel.
(Refer to ‘Appendix -1.Pan/Tilt/Zoom Camera Installation’.)
▶ Configuration
▪ Recording video quality: Setup the recording video quality of selected camera.
▪ Record maximum possible frames: Setup the record maximum frame rate of selected camera. (1~30 fps)
▪ Record all frames when event occurs: If checked, it records all frames of video of selected camera when event
occurs at selected camera.
▪ Pre-alarm recording duration: Enter the pre-alarm recording duration (time) of selected camera when event occurs
at selected camera. (max 5 sec.)
▪ Popup window when event occurs: If checked, in case of the QLR1660 Server window is minimized in execution,
popup window when event occurs at selected camera.
▪ Same configuration for all cameras: If checked, configuration (video quality, record frame rate, etc.) of all cameras
will be set the same as this camera.