Filter
Top Products
Parameter table B - Water Heater Operation (continued)
Table 1E_(continued from previous page) This table lists SMART SYSTEM control module parameters and where to
access them for water heater operation ONLY
Menu
Sub
Item
Description
See
Page
User Access Installer Access
Display Modify Display Modify
I
1 BMS Type 23 No No Yes Yes
2 Voltage at Minimum (V at Min) 23 No No Yes Yes
3 Voltage at Maximum (V at Max) 23 No No Yes Yes
4 Minimum Power (Min Power) 23 No No Yes Yes
5 Maximum Power (Max Power) 23 No No Yes Yes
6 Minimum Setpoint (Min Setpoint) 23 No No Yes Yes
7 Maximum Setpoint (Max Setpoint) 24 No No Yes Yes
8 Voltage to Start CFH (V at Start) 24 No No Yes Yes
9 Voltage Differential Stop CFH (V Diff Stop) 24 No No Yes Yes
J
1 DHW Pump Delay (DHW Pump Dlay) 24 No No Yes Yes
K
1 Service Interval Time (months) (Srv Int Time) 24 No No Yes Yes
2 Service Interval Run (Srv Int Run) 24 No No Yes Yes
3 Service Interval Operation (hours) (Srv Int Op) 24 No No Yes Yes
4 Reset Service 24 No No Yes Yes
5 Accept Personality Plug (Accept PPlug) 24 No No Yes Yes
BMS
PUMPS
SERVICE
NOTIFICATION
Copper-fin II/IIE Boiler and Water Heater Service Manual
1 Service
16