Lightolier IS:6440 Indoor Furnishings User Manual


  Open as PDF
of 4
 
INSTALLATION OF BASIC OR ADVENT LYTESPAN TRACK INTO HOUSINGS (Cent’d.)
1S:6440
Page 4 of i
3.
4.
INSTALLING TRACK INTO HOU!jlNGs IN pATTERNs AUX.ELECTRICAL
&
CONNECTOR
/
POLARITYKEY
Insert AUX. ELECTRICAL CONNECTORS into track units
4~G”\
r
TRACK (Basic)
at corners and intersections, POIARITY KEY points
away from BEAD.
‘%
.
# .C
NOTE One extra AUX. ELECTRICAL CONNECTOR will be
DEAD
“/”
.,\
discarded when used with “T” HOUSING/SPLICEBOX.
‘h~
C%R Y
5.
6.
BEAD ~
Insert DEAD END COVERS into the end of track
‘*&[
units not adjacent to corners or intersections.
FIG. 13
‘.
.
.-
Insert INDIVIDUAL TRACK
UNITS into appropriate
HOUSINGS and tighten
screws in MOUNTING CLIPS
with allen wrench to lock
track in place.
In each straight run of
HOUSINGS, insert JOINER
TRACK UNIT into HOUSING,
plug COUPLER into in-
dividual TRACK UNIT and
tighten screws in MOUNTING
CLIPS and COUPLERS.
Repeat for all JOINER TRACK
UNITS in run.
CAPTIVE
NUT
SPACER
HOUSING
e
HOUSING ~ ,/ ,/ , -..>
&
,,
HOUSINGK5PLICE BOX
\
+
FIG. 14
,.-
,/ “
*
.
““ ~ ‘,~D,v,~uAL TRAcK
,/
MOUNTING CLIP
UNIT
ASSEMBLY
AIJx ELEc~Rlf.AL~ ~ATLEN’wRENcH
CONNECTOR
HousNG<4-HOus’~~~pL’cE
~ AUX. ELECTRICAL
CONNECTOR
JOINER TRACK UNIT
MOUNTING CLIP
ALLEN WRENCH
FIG. 16
COUPLER >
L
~ TRACK
(Saslc)
L—
~ ALLEN
wRENCH
FIG. 15
INDIVIDUAL TRACK
UNIT (Basic)
Splice leads from AUX. ELECTRICAL
HOUSINGK$P
CONNECTORS to supply leads (for
s
BOX
power feed) or to each other (for power
continuity). Follow color code white to
white, black to black and for ADVENT,
red to red.
L
Cap any unused leads from AUX.
AL
ELECTRICAL CON NECTOR(S).
HOUSINGISPLICE —1
Push leads into HOUSINGI
BOX
SPLICE BOXES and
insert COVERS.
CO=%
COVER%
FIG. 17 FIG. 18
POWER FEED
POWER CONTINUITY
INSTALLATION OF COVER FOR HOUSING OPENING
COVER is installed in HOUSINGS without track.
Cut COVER if required. In patterns, cut COVER to
*
HOUSINGESPLICE
BOX
distance between the COVERS for the HOUSING/
(
/
SPLICE BOXES. COVER snaps into HOUSING.
HOUSING ~
&
, u ;
. C’
COVER
,,
--1’
L
COVER FOR HOUSING
OPENING
FIG. 19
—-
LOAD DATA
4
SUSPENSION BEAM MOUNTING
MAXIMUM LOAD
Cables or Stems, spaced 8 Ft. apart
5 lb. Lytespots on 1 Ft. Spacing
Wall Mounting Kit, 12 Ft. Span
5 lb. Lytespots on 3 Ft. Spacing
or 3.5 lb, Lytespots on 2 Ft. Spacing
Most Lytespots weigh under 3 Ibs.
 previous